Digital pressuremeter tension tester power transmission systems rope
1: High precision, high resolution.
2: Five kinds of test modes, three kinds display modes—To improve test efficiency to the greatest extent.
3: N (Newton), kg (kg), lb (lb) three testing units for selection, mutual conversion.
4: Gravity acceleration setting function—Users can input the precise gravity acceleration value of testing place, make the testing and unit conversion more accurate.
5: Peak holding function—Maintain peak display until manual reset.
6: Automatic peak function—Maintain peak value can be removed automatically after 2 seconds.
7: Can set upper and lower limit value to make statistical analysis, the value more than comparative value, the alarm buzzer will alarm.
8: Data stored function, we can store 896 test values.
9: 10 minutes without operating automatic shutdown, green initiative.
10:High quality charging power,charge voltage from 240V to 100V, can adapt to domestic and foreign most areas,also have short circuit, leakage, overload protection function.
11: 2 sets of installation dimensions, adapt to domestic and foreign most test machines,convenient to installation and using.
12: Six digit Big screen display.
Type/Specification
|
TEGA-4001
|
TEGA-4002
|
TEGA-4005
|
TEGA-4010
|
TEGA-4020
|
Maximum load value
|
10KN
|
20KN
|
50KN
|
100KN
|
200KN
|
Load division value
|
0.01KN
|
0.01KN
|
0.01KN
|
0.1KN
|
0.1KN
|
0.001Mg
|
0.001Mg
|
0.001Mg
|
0.01Mg
|
0.01Mg
|
|
0.001Klb
|
0.001Klb
|
0.001Klb
|
0.01Klb
|
0.01Klb
|
|
Error of indication
|
+/-0.5%
|
+/-1.0%
|
|||
Accuracy
|
According to the ropes characteristics of different forms, precision is the 2%-6% of the full range.
|
||||
Unit
|
N(KN) Kg(Mg or T) Lb(Klb)
|
||||
Output interface
|
Rs232 Nine holes socket
|
||||
Power
|
Rechargeable batteries Battery voltage(100V-240V)
|
||||
Sensor structure
|
S type or cylinder shape high-accuracy sensor (External)
|
||||
Operating temperature
|
-20℃~+60℃
|
||||
Transportation temperature
|
-20℃~+60℃
|
||||
Relative temperature
|
10%-90% RH
|
||||
Work environment
|
No seismic focus and corrosive medium around
|
||||
Net weight
|
About 400g+weight of sensor
|
||||
Size
|
230 X 66 X 36mm
|