Magnetic digital bevel box protractor angle gauge woodwork tools
2. The unit will directly enter the state of absolute angle measurement every time be turned on (No matter change the batteries)
3. Absolute/ relative measurement conversion.
4. Power: 3pcs 3V CR2032 batteries
5 Absolute&Relative angle measurement
6 Magnetic base securely attaches gauge to any metal surface
7 Large LCD display reads upright at any angle
8 Degree & slope conversion,
– Platform monitoring
– Drainage angles and run-off slopes
– Grader and tractor work alignment
– Setting blade angle of Circular Saws
– Setting blade angle of Miter Saws
– Tool setting on Lathes
– Setting work piece angle for milling
– Check drill press table setting, table saw, jointer table, band saw, jointer fence or band saw table
Functions:1. Absolute angle measurement
Press ON/OFF button and the unit will directly enter the state of absolute angle measurement. It will display the angle between the measured surface and the level. When the angle between the working surface of the unit and the level changes, the angle value changes accordingly. When the two indicating arrows on both sides of the LCD display appear, they show that the working surface of the unit is not on the level.
2. Relative angle measurement
Put the unit’s working surface on one surface, press ”Calibrate” button for 1-2 seconds, “0.00°” is displayed. Then move the unit to other surface to be measured, the displayed value will be included angle of the two surfaces. Press ”Calibrate” button for 3-5 seconds, it will change to the state of absolute measurement
3. Upright display
The displayed value would be not upside down whatever the unit is upside or no
– Calibrate button
– Runs on by 3 pcs CR2032 3V batteries(battery not including for air shipment)
Order No. | Range | Resolution | Accuracy | Remarks |
BB-05 | 4*90° | 0.1° | ±0.1° | |
BB-05A | 4*90° | 0.1° | ±0.1° | With Bubble |