Inside micrometer outside micrometer
Wire micrometer for piano guitar string
Part NO: DM-124001
Wire micrometers take measurements of small wires and other round pieces, Designed for measuring wire thickness You can also use it to measure the diameter of small balls
3 flutes 5 flutes 7 flutes V anvil digital micrometer
Part NO:DM-153331
Spindle lock
Ratchet thimble
Standard included
Carbide tipped measuring faces.
Forged steel frame with enamel finish
IP65 V anvil 3 flute digital micrometer
Part NO: DM-193331
- It measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three flutes.
- V-anvils with a centreline groove are available for measuring the pitch diameter of taps by the single-wire method.
7 Flutes V Anvil Micrometer
Part No: DM-123371
- 7 Flute: 128 degree 34’17”
- Spindle diameter: 6.5
- Range: 5-25mm, 25-45mm, 45-65mm, 65-85mm
Analog 5 flutes mechanical v anvil micrometer
Part NO: DM-123351
The V anvil micrometer finds its application in measuring cutting tools, taps, reamers, end mill, with odd Flute, Namely 3, 5, 7 Flute. ROK International always provide state-of-art special micrometer to customers around the world.
Mechanical 3 flutes V-anvil micrometer 1-15mm 5-20mm 35-50mm
Part No: DM-123331
- Type: V anvil
- Angle: 60 Degree
- Length of anvil: 18mm
- V-Anvils with a centerline groove are available for measuring the pitch diameter of taps by the single-wire method
DIN ISO Digital universal micrometer with 7 pairs of individual anvils
Part NO: DM-153001
The micrometer is featured with several different anvil and spindle, one micrometer can be changed into 7 micrometers. It is special Micrometer measruing tools, Steel frame forged and enamelled. Quick-change anvils. Zeroing by clamping slide sleeves
Universal micrometer with interchangeable anvils
Part NO: DM-123001
This Universal Micrometer should be used with optional interchangeable tips,
Optional anvils/spindle-tips for screw thread measurement (matching V and cone) are also
available.
Mechanical interchangeable anvil uni-micrometer
Part NO: DM-122801
Uses interchangeable anvils (flat and rod included) to support varied measurement needs. Applications include measuring wall thickness of cylinders and tubes, shoulder to edge distance, rivet head height etc,
IP 54 Digital uni-mike micrometer interchangeable anvil
Part No: DM-152801
- It is designed to accept interchangeable anvils shaped for specific tasks.
- You can use it to measure the wall thickness of tubes, as well as openings and slots from edge to edge, and features in hard-to-reach locations
Pistol-grip three point bore gauges 6-300mm
Part No: IM-322101
- Single handed operation, right and left hand viewing
- Self-centering 3-point head for highly accurate internal measurements
- Highly durable carbide tipped contact points
Analog two point internal micrometer
Part NO:IM-321801
- Satin chrome finish helps resist rust and reduce glare
- High-grade tool steel construction for durability
Digital two point micrometer inside micrometer 50-300mm
Part NO: IM-321501
ROKTOOLS supplys different inside micrometer, including three point micrometer, two point micrometer, tubular inside micrometer. Two point micrometer can measure deep holes using an Extension rod
IP65 digimatic tube micrometer 0-100mm
Part NO: DM-19070
Designed to measure the wall thickness of various tubing or arc surface item. with spherical anvil and flat spindle.
Digimatic tube micrometer deep throat micrometer
Part NO: DM-180701
Provide different size for depth throat, 200-600mm at customer’s request. manufactured by ROK Internaitonal industry Co., Limited
Digital spherical anvil tube micrometer mperial metric convertible
Part NO: DM-140701
- For wall thickness of tubing measurement
- With ABS/INC function
- IP 54 protection
- Hardened fram
Mechanical tube micrometers for measuring wall thickness of tubing
Part NO: DM-120701
- Anvil is precision ground
- Ratchet thimble
- Includes wrench for quick and easy zero adjustment on sleeve and case
Cheap digital tube wall thickness micrometer spherical face
Part NO: DM-01B
- Cheap and affordable Low cost
- Spherical Face or ball face Designed to measure wall thickness of various types of tubing or arc surface, pipe wall
Tube micrometer reloading ball spherical anvil neck thickness
Part No: DM-110701
- Clear graduations on satin chrome finish
- Carbide spindle tip
- Ratchet Stop
- Measure case neck thickness and uniformity
Deep throat tube micrometer spherical anil 150mm 200mm 300mm
Part NO: DM-170701
The deep throat tube micrometer is designed for measuring large tube or deep sphercial items. ROK International can OEM for different depth of throat of micrometer.
60mm diameter disc micrometer gear tooth thickness micrometer
Part NO: DM-170801
- Strong cast steel frame
- Large Anvil and spindle
- Spindle diameter: 8mm
IP65 Digital disk micrometer 0-200mm
Part NO: DM-190801
- Anvil: Disc, Spindle: disc
- IP 65 Dust proof
- Meet nantional standard
- Meaure the thickness of paper
Digitmatic disc micrometer gear tooth thickness micrometer paper thickness
Part NO:DM-150801
The Micrometer is features with the spindle and Anvil attached disk ranging from 20mm-30mm. The micrometer is provided to measure the thickness of paper, metal sheet, film with 0.001mm least count.
Tooth thickness micrometer disc micrometer
Part NO: DM-120801
Disc Micrometer, for measuring the gear tooth common normal. also can be used for measuring the thickness of paper or film
Digital spline micrometer 2mm diameter anvil and spindle
Part NO: DM-152101
Manufacturer: ROK International Industry Co., Limited
Measuring force: 5-10N
Thimble and sleeve satin chrome finish
Resolution: 0,00005″/0,001 mm
Digital spline micrometer 2mm anvil and spindle water resistance IP65 level
Part NO: DM-192101
High accuracy and oil-resistant material
The Micrometer is featured with small diameter anvil and spindle, which can put into the small hole to measure the thickness between two holes
Mechanical spline micrometer outside micrometer small anvil
Part No: DM-122101
IP54 Digital screw thread micrometer screw pitch diameter
Part No: DM-153101
Painted enamel and heat insulated frame
60 degree or 55 degree V-anvil and conical spindle (interchangeable) are optional
Sizes over 25 supplies setting standard, With a standard bar except 0-25mm
ROKTOOLS analog screw thread micrometer mechanical type screw pitch
Part No: DM-123101
Provides different interchangeable anvil for different thread such as metric or 55 withworth screw
IP65 Digital screw thread micrometer 55 degree or 60 degree thread TPI whitworth
Part No: DM-193101
The Micrometer is designed for measuring Metric 60 degree and 55 degree Whitworth thread It mainly measures the pitch diameter of the screw thread and it shows the variation in drunken thread
ROKTOOLS Deep throat digital point micrometer 150 200 300mm depth
Part NO: DM-140601
Deep throat 150mm, 200mm, 300mm 400mm, 500mm or any other depth to measure throat, slot and other hard-to-reach area
IP65 Digimatic point micrometer 15 or 30 degree tips
Part NO: DM-190601
With fast feed system, The inspector can measure the workpiece very fast . All Our micrometer are manufactured with higher standard and with Excellent material.
IP 54 Digital point micrometer
Part NO: DM-150601
Featued with pointed anvil and spindle to measure drils, groove or hard to reach area.
0-25mm Mechanical micrometer head
Part No: MD-421401
The mounting sleeve of the micrometer head is easy to be fixed on the bracket seat. The main ruler on the shaft sleeve has two rows of scale lines. The one marked with numbers is a full millimeter scale line (1mm/div), and the other row is a half millimeter scale line (0.5 mm/grid); 50 equal division lines (0.01mm/grid) are engraved on the front circumferential surface of the differential cylinder.
29mm Diameter thimble micrometer head DIN 863
Part No: MD-430401
Meet International Standard
Packed with fitted box
29mm Diameter thimble
20mm Large thimble micrometer head
Part No: MD-420401