AC 600V Digital Leakage Clamp Meter Clamp Ammeter With Rs232 Interface
Specification:
*Power Supply 6F22 9V
*Process Type Clamp CT, Integral Approach
*Display Type 4 Digits LCD
*Line voltage Below AC 600V
*LCD Dimension 35mm×21.5mm; Display Dimension: 32mm×15mm
*Sampling Rate 2 Times/Second
*Frequency 50Hz, 60Hz Automatic identification
*Shifting Automatic Shift
*Range 0.00mA~300.0A
*RS232 Interface With RS232 interface, Data stored in the memory can be uploaded to the computer, with software monitoring
*Data Memory 99 sets, “FULL” Blinking when memory is full
*Peak Maintaining Peak value capture hold function, press HOLD without Release to display peak value
*Reading Hold Reading hold function: “DH” symbol display
*Overflow display Range overflow function: “OL” symbol display
*Automatic Shutdown 5 minutes after the boot
*Battery Detection When battery voltage is lower than 7.2V, low battery symbol will shown to remind battery replacement.
*Meter Weight 140g (With battery)
*Rated Power 5mW
*Working Temperature and Humidity 0℃~40℃; below 80%rh
*Storage Temperature and Humidity -10℃~60℃; below 70%rh
*Insulation Strength AC2kV/rms (between core and box)
*Safety Provisions IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)
Package:
*Accessories Meter: 1 piece, RS232 Com-cable:1 piece; Software Disk: 1 piece;
Note: There is no battery in the package.