Handheld Leakage Clamp Tester Clampmeter Amp Tong Tester
Specification
Function: Measurement of AC leakage current, AC current and on-line measurement
Power: Zn-Mn dry battery,6F22,9V (Not included in the package)
Test Mode: Four digits LCD display
Dimension:
Width × Height× Thickness:
175mm×70mm×38mm
LCD Dimension: 35mm×21.5mm, display domain: 32mm×15mm
Sampling Rate:about 2 times/s
Frequency:50/60Hz Automatically
Range Shift: Automatically
Accuracy:(23℃±3℃,below 70%RH)
0.00~60.00A: ±1.5%±5dgt
60.00A~199.9A: ±2%±5dgt
200.0A~300.0A: ±4%±5dgt
300.0A~600A: ±4%±5dgt
Voltage Range:AC600V
Storage: 99units,all used when display FULL
Peak Hold: Push HOLD without release, the meter will show the peak value during the pushing period
With Hold function
Over Load Indicator: OL indicating the current is out of range
Auto Power-off
Low power Consumption: About 5mW
Temperature and Humidity:Working: 0℃~40℃,below 80%rh
Storage: -10℃~60℃,below 70%rh
Insulating Strength: AC2kV/rms (between the alloy of the clamp and the housing)
Applicable Safety Rules: IEC1010-1,IEC1010-2-032,pollution, etc 2, CAT Ⅲ(600V)
Note: There is no battery in the package