Coating thickness meter mil gauge with probe build in
Part No: CTME-8855
What mateiral it can measure:
–The F probes :
non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminum , chrome etc.) on magnetic materials (e.g. iron, nickel etc.) . often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminum tile, some alloy tile, paper etc.
– The N probes
non-magnetic coating, anodizing, varnish, paint, enamel, plastic coatings, powder, etc. appliedto aluminum, brass, non-magnetic stainless steel, etc.
Why choose CTME-8855
* Automatic substrate recognition.
* Auto /Manual Power off
* Two measurement mode: Single and Continuous
* Wide measuring range and high resolution.
* Metric/Imperial convertible
* Digital backlit display
* with RS232 output
* Large storeage: Can store 99 groups of measurements.
* Statistics is available.
2.SPECIFICATIONS
-Display: 4 digits LCD, backlit
-Range: 0~1250 μm/0~50mil
(other ranges can be specified )
-Min.radius workpiece: F: Convex 1.5mm/Concave 25mm
N: Convex 3mm/ Concave 50mm
Min. measuring area: 6mm
Min.Sample thickness : 0.3mm
-Resolution: 0.1 μm (0~99.9μm); 1 μm (over 100μm)
-Accuracy: ±1~3%n or 2.5 μm or 0.1mil (Whichever is the greater)
-Bttery Indicator: Low batter indicator.
-PC interface: with RS-232C interface
-Power supply: 2×1.5 AAA(UM-4) battery
-Operating condition: Temp. 0~50℃ .
Humidity <95% .
-Size: 126x65x35 mm; 5.0×2.6×1.6 inch
-Weight: about 81g(not including batteries)
Standard accessories:
-Packing case……………….1 pc.
-Operation manual ………… 1 pc.
-F probe in built ……………..1 pc.
-NF probe in built……………1 pc.
-Calibration foils …………..1set.
-Substrate (Iron) …………….1 pc.
-Substrate (Aluminium)……1 pc.
Optional accessories: RS-232C cable & software:
1.USB adaptor for RS-232C
2.Bluetooth interface
2.Bluetooth interface
Note: Any liquid or powder will be removed before shipping abroad.
The Weight is package weight, not net weight.
