LCR Meter Tester LCR Automatic Parameter Select 100Hz-10kHz
Part No.: LCRM-AT281
Feature:
Principle parameter 0.8 inches LED display, sub parameter 0.5 inches LED display.
Display A L, C, R, Z
Display B Q, D
Comparator(sorting) function: 5-bin sorting
Beep: can turn on/off beep for all comparator results.
Specification
Parameters:L,C,R,|Z|
Monitor Parameters:D,Q
Accuracy:0.25%
Frequency:100Hz,120Hz,1kHz,10kHz
Display Range:L: 0.01μH(10kHz)-9999H C: 0.01pF(10kHz) – 9999μF R,Z: 0.0001Ω – 99.99MΩ Q: 0.0001 – 9999 Δ%:-9999% – 9999% D:0.0001 ~ 9.9999
Source Resistance:30Ω , 100Ω
Range:Automatic and manual with 6 ranges
Display Max:Principle parameter: 99999 Sub parameter: 99999
Signal Level:0.1Vrms, 0.3Vrms and 1Vrms (1±10%)
Speed:Slow: 3 times/second, Fast: 10 times/second
Comparator:5-bin sorting
Adjustment:Short and open sweep frequency zero clearing
Interface:None
LED display LCR automatic parameter select
198V ~ 252VAC 48.5Hz ~ 52.5Hz
220mm*85mm*259mm
ATL501
ATL601
ATL508