Portable A-scan three-in-one phased array ultrasonic flaw detector TOFD
Application:
– Fastening Bolt
– Weld Detection of Friction stir welding
– Fusion depth detection of bridge U Rib plate
– PE pipe electric fusion welding detection
– Circular seam detection of small diameter tube
– Axle detection
– T, K, Y, Y and flat weld detection
– Corrosive C scanning detection
Features:
– Phased array, TOFD, A-scan three-in-one, with PA + 2 / 4TOFD + A scan function, key switch, defect validation more efficient;
– small size, light weight, easy to carry, worry-free outdoor and high altitude;
– 32: 32 simultaneous transmit and receive, high integration, better imaging;
– The new routing of operation menu, similar to conventional A super-device operating procedures, easy to learn and easy to use;
– High-sensitivity touch-screen button, double-mode shuttle knob operation,more convenient;
→ Built a large number of open model of the workpiece, the defect display is intuitive, the analysis of shaped structure easier;
(Suitable for flat welds, “T” welds, fillet welds, pipe welds, forgings, plates, axles, rims, etc.)
– With T, K, Y, flat welds and other parts of the flip function, the image more intuitive;
– With focused sound ray simulation function, real-time display of the relationship between the focus point of the simulated sound wave and the weld groove;
– 60Hz refresh rate, dynamic graphics better, faster display
– Full angle TCG / DAC curve compensation function;
– ACG angle compensation, playback, correction function;
– full dynamic focus, focusing performance, defect results more accurate;
– A / B / C / D / S / L / TOFD / 3D multiple image display, defect analysis is more comprehensive;
– With depth gate, sound gate automatic alarm function, defect identification more efficient;
– With coupling monitoring function;
– With no test block module automatic calibration function;
– Support encoder scan and record fully and automatically .
– With the probe, wedge, parameters, data, reports and other documents classified editing;
– With automatic report of flaw detection output print function.
Instrument parameters:
– Display Size: 8.4 inches, 24-bit true color display
– Data Storage: Internal 16GB, external USB can be stored directly
– Expansion Interface: USB2.0 × 2, 100M / 1000M LAN × 1, VGA × 1
– Encoder interface: 1 (supports two encoder connections)
– Alarm: 1
– Operating temperature: 0-45 ℃
– Storage temperature: -20 ℃ -65 ℃
– Power supply: AC220-DC15V AC adapter, 11.1V lithium battery
– Life time: 8 hours (single)
– Size: 265 × 180 × 75 (mm)
– Weight: 2.7Kg (with battery)
Phased array function parameters:
– System bandwidth: 0.5-15MHz (-3dB)
– Digitization frequency: 100MHz 8bit
– Digital sampling point: 8192
– Digital smoothing average: 16
– aperture: 32 wafers
– S sweep beam: 256
– Repeat frequency: 1.0KHz-5.0KHz
– Refresh rate: 60Hz
– Delay accuracy: 2.5ns
– Detection method: positive detection, negative detection, detection, radio frequency waves
– launch delay range: 0-20us
– Launch voltage: 50V-200V
– Pulse width: 30ns-500ns (step 10ns)
– Pulse excitation mode: negative square wave
– Gain Range: 0-80 dB analog gain, 0-30 dB digital gain
– Gain Step: Analog gain 0.1 dB, digital gain 6 dB
– DAC: 16 points
– TCG: 16 o’clock
– Focus: launch a single point of focus, to receive dynamic focus
– Scan Image: A / C / D / S / L / 3D
TOFD module parameters:
– System bandwidth: 0.5-15MHz (-3dB)
– Digitization frequency: 100MHz 10bit
– Digital sampling point: 1024
– Number average: 16
– Repeat frequency: 100Hz-1KHz
– Refresh rate: 60Hz
– Detection method: positive detection, negative detection, detection, radio frequency waves
Packing List:
– Phased Array Ultrasonic Flaw Detector 1pcs
– PA 20 adapter
– Power Line 1pcs
– Charger 1 pcs
– Battery 2
– USB disk 8G 1pcs
– Cross screwdriver 1 pcs
– Inspection certificate 1pcs
– Test report 1
– Instruction 1