Depth gauge
Depth Gauge includes digital type and vernier type, for measuring depth below a reference surface
Dial depth gauge ball tips 0-10mm
Part No: DI-601022
The Gauges are used to accurately measure the depth or indentation of object surfaces with a bottom point as reference
Vernier depth gauge mechanical hardened depth caliper
Part NO: DG-130
Digital depth gauge small diameter rod for deep hole
Part NO: DG-172
Insidead of wide beam, DG-172 is small diamter cylindrical bar for measure the hole, Normally for small diameter holes. There are two holes on both side of base. The hole is used for fixing the gauge.
Digital depth gauge with double hooks 500mm 600mm 1000mm
Part NO: DG-152
The DG-152 series possesses two hooks at both side of tips. Can measure groove width and position of a groove, It can measure both side og grooves
Digital depth gauge with small rod contact point
Model: DG-162
This kind of gauge /depth gauge is manufactured for measuring the holes with small diameter or narrow grooves. The gauge is featured with slim rod at the top of it. With the hardened stainless steel.
0-2000mm Digital depth gauge electronic depth caliper
Part NO: DG-010
The caliper is featured with flat base on the end, the beam can be moved up and down and put into the hole to meaure. The flatness and straightness of base. The base width can be changed to customers request and OEM for different range
Electronic depth gauge with single hook 0-1000mm depth caliper
Part No: DG-120
The depth gauge is designed to meaure the depth of hole with moveable slide beam.
Tyre tread depth gauge 0-25mm
Part NO: DG-101
The Gauge is to measure tyre tread depth with high accuracy to provide data if the tyre is worn out and if the tyre should be replaced.