Digital depth gauge with small rod contact point
Model: DG-162
This kind of gauge /depth gauge is manufactured for measuring the holes with small diameter or narrow grooves. The gauge is featured with slim rod at the top of it. With the hardened stainless steel.
0-2000mm Digital depth gauge electronic depth caliper
Part NO: DG-010
The caliper is featured with flat base on the end, the beam can be moved up and down and put into the hole to meaure. The flatness and straightness of base. The base width can be changed to customers request and OEM for different range
Electronic depth gauge with single hook 0-1000mm depth caliper
Part No: DG-120
The depth gauge is designed to meaure the depth of hole with moveable slide beam.
Tyre tread depth gauge 0-25mm
Part NO: DG-101
The Gauge is to measure tyre tread depth with high accuracy to provide data if the tyre is worn out and if the tyre should be replaced.
Telescoping gauge 8-150mm
Part NO: IG-106
The gauge is used to measure bores where inside micrometers will not fit. These ends are spring loaded and are held in any given location by a long screw that is operated via a knurled ring at the end of the handle. (Small hole gages operate similarly except that the long screw is terminated by a wedge that spreads the split-globe heads apart.)
Dail bore gauge with 1000mm 1500mm2000mm depth
Part No: BG-103
Provides different size of depth of 500mm, 1000mm, 1500mm 2000mm bore gauge
Digital bore gauge with 0.01mm resolution inside hole diameter
Part NO: : BG-311
The bore gauge are recognized as comparative instruments used for measuring the roundness of inside diameters, tapers and holes
Self Centering micro Dial bore gauge 0.001mm
Part NO:BG-205
The dial bore gauge 0.001 is one of the high accuracy measuring tools for checking size, straightness and taper of the cylinder, cam and crank bores
0.001mm Digital bore gauge
Part No: BG-213
Dial bore gauge is an instrument that measures the inner diameter of small holes, While the bore gauge is simple in concept, there are actually a number of different types of bore gauges used for a variety of application, dial type and digital type.
2-4-6 Setup block layout tools parallel blocks with holes parallel block
Part NO: PABL-10401
For larger layout and set up check jobs, these 2-4-6 Blocks cant be beat. Matched blocks are hardened and precision ground so all six sides are square to within 0.0003″. These blocks also feature five tapped holes and 18 untapped holes for clamping. Tapped holes are 5/8″ – 11″ Four sides are ground and hardened
High quality steel setup block 23 hole 1-2-3″ parallel block
Part NO: PABL-10101
1-2-3 setup blocks are used to raise workpieces a prescribed distance off of a machine table or other surfaces
Steel parallel set with 3″ length 1/8 thickness steel parallel block
Part NO: PASE-24201
Made of high quality tool steel- stress relieved against distortion, packed in fitted strong box
4 pairs steel parallel set 3/16 thickness 6″ long
Part NO:PASE-24109
The parallel sets comes in pairs with ground and hardened surfaces, commonly used in vise accessories.
8″ Steel parallel set with holes
Part No: PASE-24105
They are engineered and made from tool steel, hardened and precision ground on all 6 faces to precise surface finish
Inch type 1/4 inch steel parallel set 6 inch long parallel block
Part No: PASE-24104
Made of high quality alloy steel, Precision hardened and ground Precision matched
4 pairs alloy steel parallel set 6 Inch parallel block CNC machine vise
Part NO: PASE-24103
Height Specifications Relate to Consistency Within Each matched Pair
Inch precision steel parellet sets in pairs parallel block with hole
Part No: PASE-24102
Steel parellet sets Top and bottom surface is precision ground to .0002″ flatness
Inch 1/2″ Precision steel parallel sets 4 pairs parallel block
Part No: PASE-24101
Combo Set, 4 Matched Pairs Included: One pair of 1-1/2″ x 6 x 1/2″; One Pair of 1-1/4″ x 6 x 1/2″; One pair of 1-3/4″ x 6 x 1-2, One pair of 1″ x 6 x 1/2″; Precision parallel block
Machinist metric steel parallel sets 18-32 pairs hardened
Part No: PASE-21401
Parallels sets are used in pairs to set elements (blanks) in vices, lathes, milling machines or scribing plates, Made of high-quality alloy steel, ROK international provide full range of parallel sets. It is used in pairs. packing or levelling components prior to machining in tool rooms or machine shops