Calibration Block

Products » NDT Instruments » Calibration Block

Showing all 5 results

显示侧边栏
显示 10 20 40，-1
快速预览

4-7 steps wedge for ultrasonic thickness calibration block

,

Part NO: ULCA-20001

The Test block is designed to calibrate the ultrasonic thickness meter.

快速预览

Carbon steel 1018 calibration block

,

Part No: ULCA-20007
Size: 2″ x 4′ x 6″ with a 2″ wide cutout.
Contains a 2.0″ high section between two 4.0″ sections. In accordance with AWS requirements.

快速预览

R100mm curved surface CSK-IB calibration block

,

Part No.: ULCA-20011
The CSK-IB test block adds a scale surface for testing the refraction angle of the oblique probe on the basis of the original CSK-IA. The shape and size are shown in Figure 2-1:

快速预览

35 to 75 degree BS2704 and ISO 7963 calibration block

,

Part NO: ULCA-20008
Small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain, can provide V2 calibration block based on BS2704 and ISO 7963.

快速预览

Ultrasonic calibration block with ASTM E164 and BRR/AWS standards

,

Part No: ULCA-20009
70 45 Degree 1018 Steel
Test Block calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe