AC 600V Three Phase Power AMP Clamp Meter
Features:
-Anti interference
-High accuracy and stable
-Non-contact
-Easy operation
-Black light
-Data retention, Data Storage can record 200 sets
-With RS232 port , Data can be uploaded to the computer and save.
-Auto Power off after 15m.
-Over flow indicator
Specification:
Current Range:AC 0.0A-2000A, Resolution: 0.1A
Power Range:AC 0.0KW-1200KW, Resolution: 0.1KW
Voltage Range:AC 0-600V, Resolution: 0.01V
Frequency Range:25Hz-100Hz, Resolution: 0.1Hz
Phase Range:0.0°-360.0°, Resolution: 0.1°
Power Factor Range:0.3-1.0(Capacitive or inductive) , Resolution: 0.001
Power Energy Range:0.0000KWh-72000KWh, Resolution: 0.0001KWh
Measured Wire Position:Measured wire at approximately the geometric center of the clamp
Test Mode:Clamp CT, integral mode
Clamp Size:80mm×80mm(use for cable of 80mm diameter, or 96mm×4mm flat cable for grounding )
Data Storage:200 sets, “FULL” symbol indicate the memory is full
RS232 Interface:With RS232 interface, download data to computer for analysis and management. RS232 communication wire, 1.8m
Frequency:50Hz ,60Hz automatic identification
Sample Rate:About 2 times/second
Line Voltage:Below AC 600V line measurement
Display Mode:LCD: LCD: 128dots×64dots; Display area: 43mm×29mm; 50mA with enabled backlight; 25mA with disabled backlight
Data Hold:”HOLD” symbol indicate the data holding function
Humiture:-10℃-40℃; 80%rh
Insulation strength:AC 3700V/rms.(between core and shell)
Safety Specifications:IEC1010-1, IEC1010-2-032, 2 class of pollution, CAT Ⅲ(600V)