Metric mj gauge strengthen thread plug gauge
Part No: PG-211
Hardness is clearly above the standardized minimum value, plug gauge for gauging the internal thread
M3-M12 metric thread ring gauge set
Part NO: RG-32301
Each Set (go and no go ) consists of 7 pcs ring gauge raning from M3-M12. Packed with foam and wooden box, the gauge is easy for use.
Digital EC meter tester water quality analyzer
Part No.: PHME-EC-91188-91189
Range:
PHME-EC-91188 0~1999μS/cm
PHME-EC-91189 0~19.99mS/cm
Plain ring gauge 1.8-300mm setting ring gauge
RG-802
Metric trapezoidal ring gauge tr ring gauge
Part NO: RG-307
For translation motion in machine tools like lead screws, where rapid movement is required or in screw jacks, where load to be shared is more
conform:gb/t8124 7h, 7e , 8e, 9c
BSW thread ring gauge british standard whitworth thread
Part No: RG-310
Standard: BS84.1956
The British standard coarse screw thread is known as a parallel screw thread of Whitworth form having a 55 degree included angle. With the standardization of Unified threads, the BSW Whitworth thread form is typically being utilized for replacement parts. Steel bolts of ¾ inch and below should not be made to close class limits and instead should be specified to medium class.
Straight pipe thread ring gauge G thread ring gages BSPP
UNC UNF UNEF American standard thread ring gauge
Part No: RG-302
UN = Unified national fixed pitch series
UNC = Unified national coarse series
UNF = Unified national fine series
UNEF = Unified national Extra fine series
UNS = Unified national special
NPS NPSM NPSL NPSH straight pipe thread ring gauge
Part No: RG-304
Manufactured to ANSI/ASME B1.20.1. Available in NPSM, NPSC, NPSL, NPSF and NPSI
ACME trapezoidal thread ring gauge
Part No: RG-308
Trapezoidal Threads are used for translation motion in machine tools like lead screws, where rapid movement is required or in screw jacks
NPT thread ring gauge NPTF National pipe thread gage
Part No: RG-306
NPT general purpose pipe thread plug and ring gages are manufactured per ANSI/ASME B1.20.1. Thread Check offers a complete line of plug and ring gages to inspect General Purpose National Taper Pipe Thread from 1/16 ‐ 6.0 inches
Metric thread ring gage internal metric threads din 13
Part No: RG-301
known as Thread ring gauge . used to check and inspect coarse and fine internal metric threads, there are two types of them, namely go and no go.
0-10% Salinometer pen type salinity meter portable salt tester
Part No.: PHME-3088
Range； Salt 0.0 to 10.0% ， Temp 0 to 50 oC ( 32 to 122 oF ).
Resolution: Salt 0.1%， Temp. 0.1 oC / 0.1 oF
Accuracy： Salt +/- 0.1 * After calibration. Temp. +/- 0.8 oC / +/- 1.5 oF.
0-9999 mL/g Hold fuction salinity meter salinometer
Part No.: PHME-3081
Hold Fuction
Auto correction
Low power indication
Portable salinometer digital salinity meter pen
Part No.: PHME-3086
For test solution mL / g values.ML / g value and the temperature is displayed at the same time.
Its stable performance, full-featured, easy to operate and so on.
Widely used in the monitoring of the chemical, pharmaceutical, electronics, food and otherindustries.
0-1000 mL/g Salinity meter salt meter pen-type salinometer
Part No.: PHME-3080
Measuring range: 0～1000 mL/g
Accuracy: ±1% FS
Resolution: 1 mL
Pocket pen type pH tester automatic calibration pH pen meter
Part No.: PHME-1003
Low voltage alarm display.
10 minutes automatic shutdown.
IP57 waterproof rating
Pen-type pH meter portable digital pH tester
Part No.: PHME-6023
Range: 0.00-14.0PH
Resolution: 0.01 PH
Accuracy: 0.02 PH