Back-Jaw Edge-to-Center Digital Caliper Measure Apothem
Compared with CPDC-11241, The edge to center caliper is manufactured with fixed jaw and one of jaw is with flat surface, which can closely touch the surface of the edge. which the other jaw is conical type to touch the hole of workpiece. The caliper is provided with jaws on the back of the slider so measurements can be read easily by looking down
Specification:
Order NO | Range | Accuracy | Over length | Resolution | Diameter of conical |
CPDC-11231 | 10-200mm | 0.1mm | 310mm | 0.01mm | 10mm |
CPDC-11231 | 10-300mm | 0.1mm | 410mm | 0.01mm | 10mm |