AC/DC Leakage Current Tong Tester Clamp Meter
Features:
-Wide range up to AC/DC:0.0A~1000A
-Hold function
-IEC1010-1,IEC1010-2-032,Pollution 2, CAT Ⅲ(600V)
-Voltage alarm
-Line voltage Below AC 600V
-Portable Handheld but professional
Specification: *Function AC/DC leakage measurement, AC/DC current measurement, On-line AC/DC current measurement
*Power Supply 6F22,9V
*Process Type Clamp CT, noncontact mode.
*Display Type 4 Digits LCD
*Clamp Size 25mm×30mm
*Meter Dimension LWH: 175mm×70mm×38mm
*LCD Dimension 35mm×21.5mm; Display Dimension: 32mm×15mm
*Sampling Rate 2 Times/Second
*Frequency 50Hz, 60Hz Automatic identification
*Shifting Automatic Shift
*Range AC/DC:0.0A~1000A
*Resolution 0.1A
*Accuracy ±2%±3dgt (23℃±3℃, below 70%RH)
*Line voltage Below AC 600V
*RS232 Interface With RS232 interface, Data stored in the memory can be uploaded to the computer, with software monitoring
*Data Memory 99 sets, “FULL” Blinking when memory is full
*Peak Maintaining Peak value capture hold function, press HOLD without Release to display peak value
*Reading Hold Reading hold function: “DH” symbol display
*Overflow display Range overflow function: “OL” symbol display
*Automatic Shutdown 5 minutes after the boot
*Battery Detection When battery voltage is lower than 7.2V, low battery symbol will shown to remind battery replacement.
*Meter Weight 180g (With battery)
*Rated Power 10mW
*Working Temperature and Humidity 0℃~50℃; below 80%rh
*Max error refer to environment -10℃~0℃,40℃~50℃,Error will increase max to 1%rdg.
*Storage Temperature and Humidity -10℃~60℃; below 70%rh
*Insulation Strength AC2kV/rms (between core and box)
*Safety Provisions IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)
*Accessories Meter: 1 piece, RS232 Com-cable:1 piece; Software Disk: 1 piece;
*Power Supply 6F22,9V
*Process Type Clamp CT, noncontact mode.
*Display Type 4 Digits LCD
*Clamp Size 25mm×30mm
*Meter Dimension LWH: 175mm×70mm×38mm
*LCD Dimension 35mm×21.5mm; Display Dimension: 32mm×15mm
*Sampling Rate 2 Times/Second
*Frequency 50Hz, 60Hz Automatic identification
*Shifting Automatic Shift
*Range AC/DC:0.0A~1000A
*Resolution 0.1A
*Accuracy ±2%±3dgt (23℃±3℃, below 70%RH)
*Line voltage Below AC 600V
*RS232 Interface With RS232 interface, Data stored in the memory can be uploaded to the computer, with software monitoring
*Data Memory 99 sets, “FULL” Blinking when memory is full
*Peak Maintaining Peak value capture hold function, press HOLD without Release to display peak value
*Reading Hold Reading hold function: “DH” symbol display
*Overflow display Range overflow function: “OL” symbol display
*Automatic Shutdown 5 minutes after the boot
*Battery Detection When battery voltage is lower than 7.2V, low battery symbol will shown to remind battery replacement.
*Meter Weight 180g (With battery)
*Rated Power 10mW
*Working Temperature and Humidity 0℃~50℃; below 80%rh
*Max error refer to environment -10℃~0℃,40℃~50℃,Error will increase max to 1%rdg.
*Storage Temperature and Humidity -10℃~60℃; below 70%rh
*Insulation Strength AC2kV/rms (between core and box)
*Safety Provisions IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)
*Accessories Meter: 1 piece, RS232 Com-cable:1 piece; Software Disk: 1 piece;
