Handheld universal impact rebound leeb hardness tester
HT-3200 is an innovative portable Leeb hardness tester with our new patent technology, which makes HT-3200 a universal angle (UA) impact direction hardness tester. It is no need to set up impact direction when taking measurement by any angle. Therefore, HT-3200 offers a linear accuracy comparing to the angle compensating method.HT-3200 is also a cost saving hardness tester and has many other features.
60mm diameter disc micrometer gear tooth thickness micrometer
Part NO: DM-170801
- Strong cast steel frame
- Large Anvil and spindle
- Spindle diameter: 8mm
IP65 Digital disk micrometer 0-200mm
Part NO: DM-190801
- Anvil: Disc, Spindle: disc
- IP 65 Dust proof
- Meet nantional standard
- Meaure the thickness of paper
Digitmatic disc micrometer gear tooth thickness micrometer paper thickness
Part NO:DM-150801
The Micrometer is features with the spindle and Anvil attached disk ranging from 20mm-30mm. The micrometer is provided to measure the thickness of paper, metal sheet, film with 0.001mm least count.
Tooth thickness micrometer disc micrometer
Part NO: DM-120801
Disc Micrometer, for measuring the gear tooth common normal. also can be used for measuring the thickness of paper or film
Digital spline micrometer 2mm diameter anvil and spindle
Part NO: DM-152101
Manufacturer: ROK International Industry Co., Limited
Measuring force: 5-10N
Thimble and sleeve satin chrome finish
Resolution: 0,00005″/0,001 mm
Digital spline micrometer 2mm anvil and spindle water resistance IP65 level
Part NO: DM-192101
High accuracy and oil-resistant material
The Micrometer is featured with small diameter anvil and spindle, which can put into the small hole to measure the thickness between two holes
Mechanical spline micrometer outside micrometer small anvil
Part No: DM-122101
Sheet metal micrometer graduated dial
Part No: DM-122601
Non-Standard special micrometer is designed for measuring thickness of sheet metal, paper, plastic, and rubber parts. This Sheet Metal Micrometer comes with a graduated dial
IP54 Digital screw thread micrometer screw pitch diameter
Part No: DM-153101
Painted enamel and heat insulated frame
60 degree or 55 degree V-anvil and conical spindle (interchangeable) are optional
Sizes over 25 supplies setting standard, With a standard bar except 0-25mm
ROKTOOLS analog screw thread micrometer mechanical type screw pitch
Part No: DM-123101
Provides different interchangeable anvil for different thread such as metric or 55 withworth screw
IP65 Digital screw thread micrometer 55 degree or 60 degree thread TPI whitworth
Part No: DM-193101
The Micrometer is designed for measuring Metric 60 degree and 55 degree Whitworth thread It mainly measures the pitch diameter of the screw thread and it shows the variation in drunken thread
ROKTOOLS Deep throat digital point micrometer 150 200 300mm depth
Part NO: DM-140601
Deep throat 150mm, 200mm, 300mm 400mm, 500mm or any other depth to measure throat, slot and other hard-to-reach area
IP65 Digimatic point micrometer 15 or 30 degree tips
Part NO: DM-190601
With fast feed system, The inspector can measure the workpiece very fast . All Our micrometer are manufactured with higher standard and with Excellent material.
IP 54 Digital point micrometer
Part NO: DM-150601
Featued with pointed anvil and spindle to measure drils, groove or hard to reach area.
Dual values wireless rebound leeb hardness tester
The HT-3202 is an innovation of ROKTOOLS series Portable Hardness Tester. It works with a wireless RF probe. The RF probe can transfer measuring value to main unit wirelessly via RF module within the range of 10 meters. There is a rechargeable Li-ion battery inside the RF probe and can be charged directly by USB port of PC. The main unit with LCD display can be placed around anywhere. So one person is OK for operation. Besides, the main unit with magnetic housing can also be attracted upon to the surface of workpiece to avoid of dropping to damage.
Large LCD display with backlight probe handheld hardness tester
HT-3203 is an advanced hand-held digital metal hardness tester with characters of high accuracy, wide measuring range and easy operation. It is suitable for testing the hardness of all metals especially on site for large structure or assembled components, which is widely used in the industry of power, petrochemistry, air space, vehicle, machine and so on.
0-25mm Mechanical micrometer head
Part No: MD-421401
The mounting sleeve of the micrometer head is easy to be fixed on the bracket seat. The main ruler on the shaft sleeve has two rows of scale lines. The one marked with numbers is a full millimeter scale line (1mm/div), and the other row is a half millimeter scale line (0.5 mm/grid); 50 equal division lines (0.01mm/grid) are engraved on the front circumferential surface of the differential cylinder.
Double coil design leeb hardness meter tester
Enlarged measruing range , suitable for Low hardness materials such as low carbon steel HRC HB and ultra-high hardness materials, Equipped with Bluetooth and USB interface, can print wirelessly and connect to computer.