Showing 81–120 of 141 results

250V-1000V RCD Insulation Voltage Tester

Part No: UT526

AC or DC Judgment

250V-1000V RCD Insulation Voltage Tester can mainly test parameters of residual currentdevice (RCD), earth, insulation resistance, DCV and ACV

Insulation Resistance Tester 500-5000V High Voltage Insulation Tester

Part NO: UT513

Insulation Resistance Tester 500-5000V High Voltage Insulation Tester uses test voltages of 500V, 1000V, 2500V and 5000V. At 500V this tester can carry out insulation resistance measurements

30Ω And 100Ω Two Impedances Output Inductance Tester Meter

Part No.:INMT-TH2775B

30Ω And 100Ω Two Impedances Output Inductance Tester Meter  Reasonable combination of simple operation and powerful functions , Stable reading, Up to 15 times/second measurement speed

Impedance Analyzer 20Hz-5MHz LCR Meter

Part No.: TH2839A

Impedance Analyzer 20Hz-5MHz LCR Meter

AC Test parameters:Cp/Cs,Lp/Ls,Rp/Rs,|Z|,|Y|,R,X,G,B,θ,D,Q,Vac,Iac

DC Test parameters: Rdc,Vdc,Idc

AC DC Hipot Tester Electrical Safety Tester Analyzer

Part NO.: TH9310

AC DC Hipot Tester Electrical Safety Tester Analyzer used to test the withstand condition of the product in the harsh use environment. Withstanding voltage test,Insulation resistance test,Arc detection.

High Voltage Clamp Ammeter High Low Voltage Clamp Meter 600A

Part No.: CLME-2404

High Voltage Clamp Ammeter High Low Voltage Clamp Meter 600A specially designed and manufactured for high precision high voltage current measurement; use the latest CT technology and integrated mask digital technology; composed of special high voltage detector, wireless receiver and high voltage insulation rods. Wireless transmission can receive the measured data by penetrating storey building barriers or 30 meters. If not use insulated rods, it can also used as high-precision low-voltage clamp meter and leakage current meter, can accurately measure the 0.00mA ~600A current or leakage current.

 

Wireless High Low Voltage Clamp Meter Online AC Current Tester

Part No.: CLME-2402

Wireless High Low Voltage Clamp Meter Online AC Current Tester

Range: 0.1mA~1000A

Circuit Voltage: below 60KV (operated with insulation rod)

Frequency Counter Timer With Pulse Width 30ns-5000s

Part NO: FUGE-7200A

Frequency Counter Timer With Pulse Width 30ns-5000s

the statistics functions of multi-average, maximum, minimum, PPM, standard deviation and Allan Variance for frequency measurement

Six Measurement Modes DC Electronic Load Tester 30A-150V-300W

Part No.: ELLO-AT8612

Six Measurement Modes DC Electronic Load Tester 30A-150V-300W

Voltage, current, power, resistance, battery capacity and battery discharge time

High Quality VFD Display 150W-300W Electronic Load Tester

Part No: ELLO-AT851

High Quality VFD Display 150W-300W Electronic Load Tester

AT8511:150W/120V/30A,AT8512:300W/120V/30A

400V Earth Ground Resistance Tester Precision 3-Wires Testing

Part NO: UT522

400V Earth Ground Resistance Tester Precision 3-Wires Testing is using micro controller with high accuracy and reliability; it can measure every electric wire, electric installation, anti-thunder equipmentís earth resistance value of those earth system. Standard: IEC 61010-1 CATIII 600V Polluting Grading: Grade II IEC 61557-1,5 IEC 61010-2-31

600V Earth Ground Resistance Tester Soil Resistivity Meter

Part No.: EGRT-1030

600V Earth Ground Resistance Tester Soil Resistivity Meter

Precise 3-pole measurement, simple 2-pole measurement

RS232 Interface Earth Resistance Soil Resistivity Tester

Part No.: EGRT-1040

RS232 Interface Earth Resistance Soil Resistivity Tester : 4-pole measurement, 3-pole measurement, simple 2-pole measurement, Earth Resistance, Soil Resistivity, Earth Voltage,AC voltage

Non-Contact Earth Ground Resistance Tester Online Resistance Tester

Part No.: EGRT-1428

Non-Contact Earth Ground Resistance Tester Online Resistance Tester

IP65 Non-Contact Earth Ground Resistance Tester

Part No.: EGRT-1429

IP65 Non-Contact Earth Ground Resistance Tester with Auto shift and Fast measurement

Small Size Earth Voltage Tester Ground Resistance Tester

Part No.: DY4100

Small Size Earth Voltage Tester Ground Resistance Tester

200V Earth Ground Resistance Tester With Double Insulation Protection

Part NO: UT521

200V Earth Ground Resistance Tester With Double Insulation Protection measuring earth resistance across three ranges: 0-20Ω/0-200Ω /0-2000Ω

Distortion Meter Frequency Measurement 10Hz ~ 200kHz

Part No.: DIME-2105

Distortion Meter Frequency Measurement 10Hz ~ 200kHz Automatic switch of range and unit, and automatic position of decimal

Function Arbitrary Waveform Generator 12bits Pattern

Part No.: FUGE-3X25

Function Arbitrary Waveform Generator 12bits Pattern 200 MSa/s of sample rate, 12 bits of vertical resolution, 25Mz Arbitrary waveform output (sine wave up to 75 Mz), One computer can be linked with several DDS-3X25 to expand multi-channels, 50 MHz frequency counter.

 

2K-200MHz Arbitrary Waveform Function Generator

Part No.: FUGE-1025G

2K-200MHz Arbitrary Waveform Function Generator

 

16 Channels Digital Function Generator Arbitrary Waveform Generator

Part No.: FUGE-2102B

16 Channels Digital Function Generator Arbitrary Waveform Generator

Dual Channel Output DDS Function Arbitrary Waveform Generator

Part No.: FUGE-8601 TFG6920A

Dual Channel Output DDS Function Arbitrary Waveform Generator

5 standard waveforms, 50 built-in arbitrary waveforms and 5 user-defined arbitrary waveforms,

Abundant modulation function, Channel coupling and combine features on CHB.

16 Waveforms Pulse Function Generator

Part No.: FUGE-5305

16 Waveforms Pulse Function Generator  including Sine, Square, Ramp, Exponent, Logarithm, Noise, etc

Clamp-on Earth Ground Resistance Tester With Large Clamp Size Meter

Part No.: CLME-2004

Clamp-on Earth Ground Resistance Tester With Large Clamp Size Meter  Wide measuring range 0.01-1200Ω

Digital Clamp Meter On Earth Ground Resistance Tester

Part No.: CLME-2002

Digital Clamp Meter On Earth Ground Resistance Tester WITH ISO and other certificate, meet international standard

High Voltage Leakage Current Clamp AMP Meter Ammeter Tester

Part No.: UT255A

High Voltage Leakage Current Clamp AMP Meter Ammeter Tester the online measurement of high voltage transmission line current, leakage current to determine the operation of the MOA

360 Degree Phrase Angle Digital Power Clamp Meter 600V 1000A

Part No.: UT231

360 Degree Phrase Angle Digital Power Clamp Meter 600V 1000A  is an instruments with Fast, slow, medium speed three sampling rate adjustable

 

3 Phrase Sequence Tester Digital Clamp Meter Power Clamp Test

Part No.: UT233

3 Phrase Sequence Tester Digital Clamp Meter Power Clamp Test

AC Voltage Leakage current three phase power clamp meter 2000A

Part No.: CLME-2302

AC Voltage Leakage Current Three Phase Power Clamp Meter 2000A Measure three phase AC voltage, leakage current, current, active power, reactive power, apparent power, power, phase between current and voltage, phase between phase voltage, frequency, power energy, phase sequence

AC 600V Three Phase Power AMP Clamp Meter

Part No.: CLME-2301

AC 600V Three Phase Power AMP Clamp Meter IEC1010-1, IEC1010-2-032, 2 class of pollution, CAT Ⅲ(600V)

2000A AC Leakage Current Clamp Meter Multimeter Tong Tester

 Part No.: CLME-2212

2000A AC Leakage Current Clamp Multimeter Tong Tester Measured wire at approximately the geometric center of the clamp

600V Tong Tester NCV VFC Digital AC DC Clamp Meter

Part No.: CLME-CM80

600V Tong Tester NCV VFC Digital AC DC Clamp Meter  Compared with CM81, CM80 has frequency duty cycle,capacitance function, while CM81 has lowz low impedance voltage function

Digital 3200A Leakage Clamp Multimeter Ammeter Meter

 Part No.: CLME-2214

Digital 3200A Leakage Clamp Multimeter Ammeter Meter Measures AC leakage current, big current (particularly suitable for leakage current measurement of cable and transformer earth steel)

Digital Leakage Current 2500A AMP Clamp Meter Clamp Ammeter

Part No.: CLME-2213

Digital Leakage Current 2500A AMP Clamp Meter Clamp Ammeter Measures AC leakage current, current, there-phase, voltage with Clamp CT, integral mode

AC/DC Leakage Current Tong Tester Clamp Meter

Part No.: CLME-2202

Handheld AC/DC Leakage Current Tong Tester Clamp Meter Wide range up to AC/DC:0.0A~1000A

 

AC600V DC Current Digital AMP Clamp Meter Tong Tester

Part No.: CLME-2201

AC600V DC Current Digital AMP Clamp Meter Tong Tester with RS232 Interface, Out of Range Indicator ,Mini size, Lightweight ,Clip-on CT, integral mode

 

20A-600A Digital Clamp Meter Multimeter Tong Tester AMP

Part No.: UT201 UT202 UT202A

20A-600A Digital Clamp Meter Multimeter Tong Tester AMP

UT202  measure temperature

UT202A  Range:20A-600A Min mode manual range

 

40A/600A Digital AMP Multimeter Clamp Meter

Part No.: UT203 UT204 UT204A

40A/600A Digital AMP Multimeter Clamp Meter uses large scale of integrated circuit with double integrated A/D converter as its core and has full range overload protection. UT203  Range: 40A/400A  UT204  True RMS  Without low battery indicator   UT204A  Range: 40A/600A With temperature measuremnt, Capacitance measurement, mzx mode without duty cyde and relative mode

1000A AC DC Digital Clamp Meter Voltage Current AMP Meter

Part NO.: UT207A UT208A UT209A

1000A AC DC Digital Clamp Meter Voltage Current AMP Meter UT208A With temerature measurement, Capacitance UT209A  With True RMS

 

Mini 200A Clamp Meter AMP Multimeter Tester Ture RMS

Part No.: UT210 A UT210B UT210C

Mini 200A Clamp Meter Ture Multimeter Tester Auto power off, low battery indication and overload protection  True RMS  UT210B  UT210C   MAX/MIN  UT210C   NCV  UT210C