Products | Page 35 of 77 | ROK International

School office digital sound level meter decibel tester

Product Code: SLME-1015

This equipment has been designed to meet the measurement requirement of Safety Engineers,Health,Industrial Safety offices and Sound Quality control in various environment,which include factory,office,traffic,family,and audio system.

快速预览

Digital logging personal noise dose meter acoustic level meter

Environment Analysis, Decibel Meter

Part No：SL-1256DOS
DOSE is a parameter used to quantify noise exposure measured in a period, during turns of % noise exposure relative to 90dBA for 8 hours

快速预览

Decibel meter db acoustic SPL decibel reader 30dBA ~ 130dBA

Environment Analysis, Decibel Meter

Part No: SLME-1014
Color; White
Measuring Range: 30~130dB, 35~130dBC
Frequency Weighting Characteristic: A & C

快速预览

94 dB sound calibrator for decibel meter

Environment Analysis, Decibel Meter

Part NO: LME-9042-ND9B
Sound Pressure Level with 94 dB and 114 dB
High Accuracy with 0.3 db

快速预览

Non-destructive sponge-type holiday detector pin hole detector

NDT Instruments, Pin Hole Detector

Part No.: WSPD-1006
Use the wet sponge method to detect pinholes in thin coatings. It is excellent tools for finding pinholes through a non-conductive coating and a conductive substrate

快速预览

4-7 steps wedge for ultrasonic thickness calibration block

NDT Instruments, Calibration Block

Part NO: ULCA-20001

The Test block is designed to calibrate the ultrasonic thickness meter.

快速预览

Carbon steel 1018 calibration block

NDT Instruments, Calibration Block

Part No: ULCA-20007
Size: 2″ x 4′ x 6″ with a 2″ wide cutout.
Contains a 2.0″ high section between two 4.0″ sections. In accordance with AWS requirements.

快速预览

R100mm curved surface CSK-IB calibration block

NDT Instruments, Calibration Block

Part No.: ULCA-20011
The CSK-IB test block adds a scale surface for testing the refraction angle of the oblique probe on the basis of the original CSK-IA. The shape and size are shown in Figure 2-1:

快速预览

35 to 75 degree BS2704 and ISO 7963 calibration block

NDT Instruments, Calibration Block

Part NO: ULCA-20008
Small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain, can provide V2 calibration block based on BS2704 and ISO 7963.

快速预览

Ultrasonic calibration block with ASTM E164 and BRR/AWS standards

NDT Instruments, Calibration Block

Part No: ULCA-20009
70 45 Degree 1018 Steel
Test Block calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe

快速预览

750kg test force magnetic hydraulic brinell hardness tester scale

NDT Instruments, Brinell Hardness Tester

Part NO: BRHT-750
Test ball: 5mm hard alloy ball
Test range: 100~650HBW
meet ASTM E110 and GB/T 4285 standard

快速预览

NDT instruments digital magnetic brinell hardness tester

NDT Instruments, Brinell Hardness Tester

Part No: BRHT-200
more accuracy and reliable
live up with GB/T231.2, ASTM E10, ISO6506.2.

快速预览

Chain hydraulic brinell hardness tester GB ISO ASTM standards

NDT Instruments, Brinell Hardness Tester

Part No: BRHT-3000A
It can be used to test rough castings, forgings, nonferrous metals and semi-finished products after tempering heat treatment, On-site testing of Steel Pipe, Bearings, Gas Cylinder.